volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Ultrasonic Sensor, Antitheft|Service and Repair|Page 966 > < Ultrasonic Sensor, Antitheft|Service and Repair|Page 964
Page 5
background image

Removing the side panel:

-

Fold out the load securing eyelets on the right-hand side panel.

-

Insert a scriber with an angled tip into the holes in the top of the covers (1). Turn the scriber so that the tip engages the reverse of the cover. Pull
the covers off.

-

Remove the screws in the load securing eyelets.

-

Remove the screw (2) at the front/top edge of the side panel.

-

Pull off the side panel at the top so that the two clips at the rear/bottom of the side window and the clip at the bottom of the D-post release.

-

Lift out the side panel.

Removing the panel on the D-post:

-

Carefully pry off the right-hand panel on the D-post at the lower edge. Use a plastic weatherstrip tool.

-

Pull the panel on the D-post forwards so that the two clips on the lower edge release. Continue to pull forwards, until the two clips further up
release.

-

Unhook the panel on the D-post backwards from the roof panel.

Note! Do not damage the panels.

-

Pry up the cover on the attachment over the cargo compartment's right-hand side window and remove the screw beneath.

Ultrasonic Sensor, Antitheft|Service and Repair|Page 966 > < Ultrasonic Sensor, Antitheft|Service and Repair|Page 964