C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Fuel Pressure Sensor: Service and Repair
Pressure sensor, fuel rail (FRP)
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Draining the fuel system
Remove:
-
the screws for the upper timing cover
-
the upper timing cover.
Drain the fuel system. See: Fuel system pressure release, B5254T7 .
Removal
Removing the fuel pressure sensor
Caution! Place paper on top of the generator.
Disconnect the connector for the sensor.
Remove:
-
the screw for the fuel pressure sensor
-
the sensor.
Installation
Note! For tightening torque, see: Tightening torque, B5254T7 See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Installing the fuel pressure sensor
