C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Hint: Collect any oil spillage using paper or similar.
Disconnect the connector for the oil pressure sensor.
Remove the oil pressure sensor.
Installation
Note! For tightening torques, see: Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque.
Installing the oil pressure sensor
Install the oil pressure sensor. Tighten. See: Tightening torque. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Connect the connector for the oil pressure sensor.
Install the lower engine splash guard. Lower the vehicle.