C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Grease the O-ring of the front intake cable, the passenger compartment connector cable and the junction connector with low-temperature grease
(part no. 1161417-9).
NOTE: Do not get any grease on the surfaces of the connector.
-
Take the bracket and the rubber guard from the kit for the passenger compartment connector. Press the rubber guard onto the bracket.
-
Tighten the junction connector at the bracket in the position illustrated. Use the screw, toothed washer and nut from the kit. The bracket must be
parallel to the length of the junction connector.
-
Position (1) cable for the engine block heater
-
Position (2) cable for the passenger compartment connector
-
Position (3) cable from the front engine block heater socket.