C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Remove the left front wheel.
-
Remove the seven screws holding the engine splash guard and remove the guard.
-
Cut the cable tie from around the brace and over the locking sleeve on the brace on the left control arm mounting.
-
Remove the locking sleeve over the cable splice and separate the cables.
Installing the junction connector
-
Grease the O-ring of the front intake cable, the passenger compartment connector cable and the junction connector with low-temperature grease
(part no. 1161417-9).
NOTE: Do not get any grease on the surfaces of the connector.
