C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Take the bracket and the rubber guard from the kit for the passenger compartment connector. Press the rubber guard onto the bracket.
-
Tighten the junction connector at the bracket in the position illustrated. Use the screw, toothed washer and nut from the kit. The bracket must be
parallel to the length of the junction connector.
-
Position (1) cable for the engine block heater
-
Position (2) cable for the passenger compartment connector
-
Position (3) cable from the front engine block heater socket.
-
Detach the cable from the front intake and engine heater from its clamps/clips to facilitate installation of the passenger compartment junction
connector.
-
Connect the front intake cable (1) to the junction connector and press the cable splice together securely.
