volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Cross-Member|Service and Repair|Page 11431 > < Front Cross-Member Bushing|Service and Repair|Page 11427
Page 1
background image

Rear Cross-Member: Service and Repair

Sub-frame rear, replacing 

Note:  The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct. 

Preparatory work 

Remove the rear springs on both sides.
Remove the rear anti-roll bar.

Removal 
Removing the brake caliper 

Remove the following on both sides: 

-

the 2 x screws 

-

the brake caliper.

Remove the brake hose from its bracket. Hang the brake caliper in a suitable way.

Removing the shock absorber 

Remove the following on both sides: 

-

the screw

-

the shock absorber from the lateral link.

Removing the air baffle 
Remove the following on both sides:

Rear Cross-Member|Service and Repair|Page 11431 > < Front Cross-Member Bushing|Service and Repair|Page 11427