C30 T5 L5-2.5L Turbo VIN 67 B5254T7 (2008)
Note! Ensure that the arrows are opposite each other.
Note! Shift the gear selector lever to neutral.
Install:
-
the control module. Do not damage the terminal pins
-
the 3 x M8 screws
-
the bracket
-
the M8 screw for the bracket
-
the 2 connectors
-
the lever, 1 nut. Tighten. See: Tightening torque. See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications.
-
the battery negative cable.
Installing the air cleaner (ACL) module
Install the air cleaner (ACL) module. See: Air filter module. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair.
Finishing
Ordering software
Order software according to:
Checking diagnostic trouble codes (DTCs)
Check that no diagnostic trouble codes have been stored during the repair.
Calibrating the gear-shift position sensor