C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Installation
NOTE: Only new keys can be used. All old keys are no longer useable.
-
Check that no pins or sockets are damaged on the connector.
-
Install in reverse order.
-
Initiate the control module in the Data Link Connector (DLC).
Replacing Control Module Security Strap
Replacing control module security strap
HINT: On a number of variants, as part of the anti-theft protection on cars with immobilizer, the control module box is locked with a security strap. The
locking strip is installed with a security screw.
Removal
-
Mark up the center of the screw and drill a suitable hole for a screw puller. Insert screw puller and remove the screw.
-
Remove security strap which is routed over the control module.
-
Clean the control module box cover carefully so that no dirt or residue falls into the box when it is opened.
Installation