C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
The switch may be replaced without removing the door panel.
Modify a spatula by rounding its corners and edges. This is done to minimize the risk of damage to the frame around the switch.
Position a 75 mm / 3 in piece of electrical tape on the spatula to protect the gap between the switch and the frame.
Move the spatula down between the switch and its frame, as shown in the figure, and carefully force out the switch.
It is important to use a wide contact surface on the tool to avoid damage to the frame around the switch.
Replace the switch.
3) Filler hatch/Boot lid (front door only)
-
Remove the door panel as described in Removal of door panel.
-
Remove the switch from the panel.
-
Remove the connector connected to the switch.
-
Replace the switch.
-
Give the switch a functional test.
Assemble in reverse order
