C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Remove:
-
the connector
-
5 screws for the loudspeaker
-
4 screws (C) for the inner door opener
-
the soundproofing mats
Hint: Scrape off the soundproofing mats using a plastic filler spatula.
-
1 nut (D) and 1 screw (E) from the lock bracket
-
the connector and the remaining nuts (D) for the lift mechanism motor
-
the remaining screw (E) for the SIPS block in the bottom edge of the door
Lift out the SIPS block
Note! Certain cars between chassis numbers 329 -604 have standard bolts and washers instead of adjustment screws. Replace with
adjustment screws.
-
the lock nuts (A) on both adjustment screws. Counterhold using a torx screwdriver. Screw in both adjustment screws as far as they will go.
Note! The front adjustment screw must not press into the guide rail. Screw in lightly by hand until it engages.
-
6 screws (B) and (F) in the upper edge of the door securing the cassette in the door.
Lift out the power window mechanism cassette.
Caution! Take care not to damage the door panels when lifting the cassette out of the door. It is easier if two people lift the cassette.
Installing the front power window lift mechanism cassette
