C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Position the counterhold on the top of the sub-frame.
Apply the drift (4) with the spikes upwards and the bushing with the rubber spikes downwards on the screw with the nut (6).
Note! The left and right-hand front bushings are different. The left-hand front bushing has an oval hole.
Screw into place in the counterhold from underneath.
Note! Check that the marking on the bushing ends up opposite the marking on the sub-frame (see the arrows).
Tighten the bushing to stop.
Remove the tools.
Finishing