C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Use sanding filler (two part). Alternatively and etching priming filler can be used.
Note! Etching priming filler should only be used on bare metal surfaces. When used it should be sprayed in a thin coat over the panel surface.
This coat is then sprayed with sanding filler according to the above.
In total the primer coat should be 35 micron thick on all surfaces (2-3 spray strokes).
Apply the stone-chip protection
Use sprayable stone-chip protection.
Spray a thick even coat.
The coat can be painted over in the color of the car.
Plastic Components
Plastic components
Exterior plastic components 200, 300, 400, 700, 800, 900, S40, V40, S70, V70, C70, S90, V90
The following is a list of exterior plastic components on each car. The abbreviations in the right column indicate what material the component is made
of.
