volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Convertible Top Control Module > < Procedures|Page 10873
Page 49
background image

Install: 

-

the 1 screw for the strap. Tighten

-

the 1 screw with the 1 nut and the slide washers.

Note! Do not tighten the screwed joint too hard. The joint should be able to run easily in the groove. 

Install the headlining according to the section for installing textile headlining above.
Calibrate the system. See  Programming and calibrating the convertible system See: Testing and Inspection/Programming and Relearning.

Convertible Top Control Module > < Procedures|Page 10873