volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10926 > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10924
Page 3
background image

First adjust.
Detach the side section of the textile headlining around the C-post.
Adjust the limit position stop for the tension bow so that there is distance of 1 mm between the mating surfaces.

Replacing the guides for the roof arches 

Removing the guides for the roof arches 

Set the convertible top to the position illustrated.
Ignition off.

Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10926 > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10924