volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10937 > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10935
Page 2
background image

Remove: 

-

1 screw for the end mounting at the front cross member

-

the Velcro strip for the wiring

-

the 2 screws securing the security straps to each rib

-

the molding for the tension bow holding the security strap

-

the 2 screws in the tension bow that secure the security strap

-

the security strap.

Replace the security strap.

Hint: Keep the old security strap. This will make it easier to mark the position of the screws.

Installing the security straps between the convertible top ribs 

Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10937 > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10935