volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Convertible Top Latch > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10936
Page 3
background image

Mark the positions for the screws. Use the old security strap or proceed as follows:
A = 501.9 mm.
B = 339.5 mm.
C = 366.1 mm.
D = 263.9 mm.
E = 71.2 mm.
F = 439.0 mm.

Install 

-

the 2 screws for the security strap in the tension bow. Tension the strap

-

the molding for the tension bow holding the security strap

-

the screws securing the security straps to the ribs

-

the Velcro strip for the wiring

-

1 screw for the end mounting at the front cross member

-

the textile outer roof according to Replacing the textile roof See: Convertible Top Canvas/Service and Repair/Removal and
Replacement/Replacing the Textile Roof 

-

the textile headlining in reverse order according to Replacing the textile roof See: Convertible Top Canvas/Service and Repair/Removal and
Replacement/Replacing the Textile Roof.

Convertible Top Latch > < Replacing and Adjusting the Limit Position Stops for the Tension Bow|Page 10936