volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing and Adjusting Micro-Switches|Page 10978 > < Replacing and Adjusting Micro-Switches|Page 10976
Page 4
background image

Disconnect the connector for the micro-switch
Pull the micro-switch from the side piece for the tensioner rib lock.
Remove the 2 tie straps.
Replace the micro-switch.

Installing the micro-switch for the rear locking arm 
Install in reverse order.
Use new tie straps during installation.

Replacing the micro-switch for the cover lock 

Removing the micro-switch for the cover lock 

Replacing and Adjusting Micro-Switches|Page 10978 > < Replacing and Adjusting Micro-Switches|Page 10976