volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Convertible Top Weatherstrip|Service and Repair|Page 11836 > < Convertible Top Weatherstrip|Service and Repair|Page 11834
Page 6
background image

Note! Be careful with the strip. 

Hint: When drilling out the rivets, install a section of fuel hose on the upper part of the drill bit to prevent damage to the strip.

Note! Remove the rivet head. Vacuum up the swarf. If the swarf is left in place there may be rattling. 

Replace the weatherstrip.

Installing the rear weatherstrip, C-post 
Install the weatherstrip so that it aligns with the other weatherstrip on the rear side window.

Hint: Use 12 mm long rivets. Start with the upper rivet.

Note! Do not damage the metal carrier on the strip. 

Check that the window is sealed to the weatherstrip. See Side door front assembly, adjusting See: Doors, Hood and Trunk/Doors/Front
Door/Adjustments/Side Door Front Assembly, Adjusting.

Replacing the inner weatherstrip for the cover 

Removing the inner weatherstrip for the cover 

Set the convertible top to the position illustrated.
Remove trim strip.

Convertible Top Weatherstrip|Service and Repair|Page 11836 > < Convertible Top Weatherstrip|Service and Repair|Page 11834