volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Convertible Top Weatherstrip|Service and Repair|Page 11839 > < Convertible Top Weatherstrip|Service and Repair|Page 11837
Page 9
background image

Remove the cover. See Replacing, adjusting and emergency opening of the cover See: Roof and Associated Components/Convertible Top/Convertible
Top Deck Lid Components/Convertible Top Deck Lid/Service and Repair.
Pull the weatherstrip upwards.
If the weatherstrip is stuck, heat it carefully using a hot-air gun.

Note! The material in the cover is made of glass fiber reinforced plastic. The material must therefore be heated carefully. 

Replace the weatherstrip.

Installing the outer weatherstrip for the cover 
Reuse the weatherstrip if possible. Remove the old tape. Install new tape.
Press the strip into place on the cover while pulling off its backing tape.

Caution! The mating surface must be completely free of dirt and grease. Do not touch the surface after cleaning. 

Caution! Both the weatherstrip and the car must be at room temperature. 

Install the cover. See Replacing, adjusting and emergency opening of the cover See: Roof and Associated Components/Convertible Top/Convertible Top
Deck Lid Components/Convertible Top Deck Lid/Service and Repair.

Replacing the tension bow weatherstrip 

Removing tension bow weatherstrip 

Convertible Top Weatherstrip|Service and Repair|Page 11839 > < Convertible Top Weatherstrip|Service and Repair|Page 11837