C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Note! The ABS hydraulic modulator is filled with brake fluid. It is important that the plugs are not removed until the brake pipes are to be
connected.
-
Check and install control module on the ABS hydraulic modulator according to Replacing the control module See: Electronic Brake Control
Module/Service and Repair. Install the screws. Tighten to 1.8 Nm.
-
Install the new ABS hydraulic modulator on the bracket and tighten the mounting screws. Tighten to 8 Nm.
-
Hold the vacuum hose to one side and carefully install the bracket in the car.
-
Connect the pump motor connector to the control module.
-
Tighten the mounting screws to 8 Nm.
On vehicles with TRACS