C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Check brake disc friction surface.
-
If brake disc shows signs of being skew, check its lateral run-out.
-
If brake disc shows signs of major wear, variations in thickness etc., replace it.
NOTE: Disc thickness = replacement point = 23.0 mm (0.9 inches). Minimum recommended disc thickness when installing new brake pads = 23.8 mm
(0.94 inches).
Installation of items
Installation of locating pins
-
Check locating pin rubber bushings. Replace as necessary
-
Grease locating pins with Volvo silicon grease (P/N 1161325-4) and insert them in rubber bushings (4). Pin should slide easily into bushings.
Installation of brake caliper and brake pads