C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Grease shim on both sides with a thin layer of silicone grease (P/N 1161325-4).
-
Install shim towards brake pad rear plates.
-
Install brake pads.
-
Install one split pin and retaining spring first, then the other split pin.
Finishing and checking
-
If brake pipe was removed from brake caliper, top up and bleed braking system. Then continue as below.
-
Check that there are no leaks and that the brakes are working properly.
Check and adjustment
-
Press brake pedal down a few times.
-
Check level in brake fluid reservoir.
-
Adjust parking brake if necessary.
Installing wheel
