C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Check brake disc friction surface.
-
If brake disc shows signs of being skew, check its lateral run-out as per Measuring lateral run-out on brake disc See: Brake Rotor/Disc/Testing
and Inspection.
-
If brake disc shows signs of major wear, variations in thickness etc., replace it as per Brake disc front, replacement See: Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Brake Disc Front, Replacement.
Note! Disc thickness = replacement point = 23.0 mm (0.9"). Minimum recommended disc thickness when installing new brake pads = 23.8 mm
(0.94").
Installation of items
Installation of locating pins
-
Check locating pin rubber bushings. Replace as necessary
-
Grease locating pins with Volvo silicon grease (PN 116 1325-4) and insert them in rubber bushings (4). Pin should slide easily into bushings.
Installation of brake caliper and brake pads
-
Push piston back in cylinder on brake caliper.
