C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Grease the shim on both sides with a thin layer of silicone grease (P/N 116 1325-4).
-
Install the shim towards the brake pad's rear plates.
-
Install the brake pads.
-
Install one split pin and retaining spring first, then the other split pin.
Finishing and checking
-
If the brake pipe was not removed from the brake caliper, continue to Checking and adjusting.
-
If the brake pipe was removed from the brake caliper, top up and bleed the braking system. Then continue as follows.
-
Check there are no leaks and that the brakes are working properly.
Checking and adjusting
-
Depress the brake pedal a few times.
-
Check the level of the brake fluid reservoir.
-
Adjust the parking brake if necessary. See Parking brake See: Parking Brake System/Service and Repair.
Fitting the wheel