C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
1/2" 19 MM See: Tools and Equipment/115 8147 Torque Socket 1/2" 19 mm.
Installing test equipment
Install measurement tool set bracket. Front: Attach bracket to caliper mounting with mounting bolts from bolt set 999 5507 SCREW SET See: Tools
and Equipment/999 5507 Screw Set.
Rear: Attach bracket to brake caliper mounting lugs with bolts from measurement tool set 999 5418 Measuring kit See: Tools and Equipment/999 5418
Measuring kit.
Brake disc maximum lateral run-out must not exceed 0.040 mm (0.0016") (brake disc front) or 0.080 mm (0.0031") (brake disc rear).
-
Remove test equipment.
-
If brake disc maximum lateral run-out is out of limits, it must be returned, if you have a turning tool available, or be replaced. Replacement
procedure as per Brake disc front, replacement See: Service and Repair/Removal and Replacement/Brake Disc Front, Replacement or Brake disc
rear, replacement See: Service and Repair/Removal and Replacement/Brake Disc Rear, Replacement.
Note! Illustration shows testing front.
Finishing