C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Depress brake pedal a few times to remove any air bubbles in the master cylinder.
Note! This step must be carried out between bleeding each brake caliper concerned.
Note! Check continuously that there is enough brake fluid in the brake fluid reservoir when replacing brake fluid.
-
Remove protective cap from bleed nipple and connect hose from collecting bottle.
-
Open bleed nipple.
-
Push brake pedal right down and hold it there for approx. 2 seconds before releasing it. Repeat this 20-30 times until there are no visible air
bubbles in the drained fluid.
-
Close bleed nipple.
-
Depress brake pedal a few times.
-
Open bleed nipple and close it when the break pedal is at the bottom Repeat this 3-5 times.
-
Remove hose and re-fit protective cap.
Bleeding other wheels
Continue bleeding as per in the following order:
-
RH front Wheel.
-
LH rear wheel.
-
RH rear wheel.
