C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Brake Hose/Line: Procedures
Brake Pipe And Hoses, Replacement
Removal
-
Remove brake pipe and hoses.
NOTE: Check that brake pipe and hoses are not damaged by plastic mounting to the left on the rear axle when they are removed.
Installing brake pipe
-
Install pipe. It may need bending to the right shape.
-
Blow pipe through clean with compressed air.
-
Tighten brake pipe to 14 Nm (10 ft.lb).
Installing brake hoses
-
Install hoses. Hoses must not be twisted when in position. Hoses have white lines running along them which show clearly if they are twisted.
-
Tighten brake hoses to 18 Nm (13 ft.lb).
Bleeding