C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Vacuum Brake Booster: Procedures
Replacing the power brake booster
Preparations
Ignition off.
Place a rag under the ABS hydraulic modulator as protection against brake fluid spillage
Removing the power brake booster
Remove:
-
The main cylinder. Then continue as follows
-
The bracket with the ABS hydraulic modulator.
Then continue according to instructions below
-
Release the cable above the power brake booster.
Remove:
-
The soundproofing under the steering wheel
-
The locking spring holding the support bracket to the brake pedal
-
The four nuts securing the power brake booster to the inside of the firewall.
Remove:
