C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Electronic Brake Control Module: Service and Repair
Replacing the control module for ABS and dynamic stability and traction control (DSTC)
Preparation
Disconnect the battery lead
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Preparations for replacement
Remove the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Hydraulic System/Brake Hose/Line/Service and Repair/Removal and Replacement/Brake
Pipe Master Cylinder / ABS Unit, Replacing.
Remove the integrated relay / fusebox. Remove the connector for the ABS unit
See.
Removal
Remove the control module
Remove:
-
the pump motor connector
-
the four screws. Use a 6 mm torx external socket.
Carefully lift the control module.
Check the control module
