C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Install:
-
the screw, 1 pc., for the damper motor
-
the link to the air damper
-
the connector.
Perform self-adjustment of the motor according to: Self-adjustment of the shutter motor end position See: Testing and Inspection/Programming and
Relearning/Self-Adjustment of the Shutter Motor End Position.
In connection with self-adjustment, check that the link to the damper runs freely and without problems.
Check that no diagnostic trouble codes have been stored during the repairs according to: Reading off diagnostic trouble codes (DTCs) See: Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes.
Install:
-
the glove compartment according to: Panel and SRS passenger airbag module
-
the soundproofing panel. See: Dashboard See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Dashboard.
Replacing damper motor air distribution
Switch off the ignition.
Right-hand drive car
Remove:
-
the soundproofing panel. See: Dashboard See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Dashboard
-
knee bolster, if installed.