C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Compressor Clutch: Specifications
Checking clearance
-
Check the clearance between the clutch plate and pulley using feeler gauge:
-
The clearance should be 0.3 - 0.5 mm (0.012 - 0.02 in).
-
0.3 mm (0.012 in) clearance all around.
-
The clearance should not be 0.6 mm (15/64) at any point.
-
Replace the shims if the clearance is not between the given values. The following dimensions are available:
-
0.2 mm
-
0.3 mm
-
1.0 mm
