volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 7472 > < Procedures
Page 2
background image

-

Shut off the air conditioning (A/C) compressor by disconnecting the cable terminals from the pressure switch (Pressostat) in the engine
compartment. (The compressor can be overridden if the air distribution selector is in the Defrost position and may therefore start up.)

Allow engine to run at working temperature for 20 minutes to expel all moisture from evaporator.

Assembling the spray 

Note! Assemble spray while engine is warming up 

-

Fit flat nozzle to Volvo rust inhibitor spray and clean nozzle.

-

Shake bottle containing Odor treatment air conditioning (A/C) well, and put the bottle in the spray holder.

-

Insert spray riser pipe in container and screw spray onto holder.

-

Set spray to green mark.

-

Connect spray to compressed air.

Hint: Do not tilt the spray excessively! Tilting spray excessively may cause liquid to escape from container!

Hint: If liquid escapes from the container empty it back in and complete the operation.

Disconnection of battery 

-

Turn off ignition.

-

Disconnect battery ground lead.

Removing power unit or fan resistor 

-

Remove the power unit or fan resistor.

For the 850: 
-

power unit according to Climate control 850 1992-

-

fan resistor according to climate control 850 1992-.

For C70/V70/S70: 

Procedures|Page 7472 > < Procedures