C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Receiver Dryer: Removal and Replacement
Replacing receiver / drier or suction pipe
Special tools:
999 5474 RADIATOR PROTECTION See: Tools and Equipment/999 5474 Radiator Protection
999 5472 KEY 5/8" See: Tools and Equipment/999 5472 Key 5/8"
Before starting work on the receiver / drier or suction pipe
Warning! Follow the safety instructions for work on air conditioning (A/C) systems. See Refrigerant, safety regulations See: Service
Precautions/Refrigerant, Safety Regulations.
Note! First read the instructions covering slow and fast leaks.
Note! When replacing a receiver / drier always replace O-rings in pipes and quick-release connectors.
Note! Always plug pipes and connectors when working on the climate control system.
Removing receiver / drier or suction pipe
Preparations
-
First read section Before starting work on the receiver / drier or suction pipe
-
Disconnect the battery negative lead
-
Drain the refrigerant from the system. See Refrigerant, overview See: Description and Operation/Refrigerant, Overview and Emptying/vacuum
pumping/filling with refrigerant See: Service and Repair/Emptying/Vacuum Pumping/Filling With Refrigerant
-
Remove the fresh air intake for the control module box.
Removing receiver / drier or suction pipe