volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 12318 > < Procedures|Page 12316
Page 10
background image

-

Check that the cable harness of the fuel level sensor has returned to the left-hand side of the vehicle.

-

Reconnect the connector and fit it back in the holder.

Fitting components 

Fit: 

-

the protective casing over the fuel level sensor (if removed). Tighten the bolts of the tank strap (if loosened) to a torque of 25 Nm.

-

both covers.

-

the cable holder with clips.

-

the panels and floor mats in the cargo compartment.

-

Check the function of completed work.

Procedures|Page 12318 > < Procedures|Page 12316