C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Release socket/housing retainer
Use a thin screwdriver with a blade 3-4 mm wide.
-
Work the locking catches/eyes carefully loose on the socket or on the housing.
The number of locking catches/eyes and their location varies on different housings. There can also be variations between pin sizes in the housing types.
Note! Take care that the locking catches/eyes are not broken off when releasing the socket.
Remove
-
Remove socket (and pull it back on the cables).
Proceed
To replace a cable terminal the next step is to remove the old cable terminal in the housing.
-
Proceed to chapter Cable terminals, different types See: Extracting the Cable Terminal From the Housing/Cable Terminals, Different Types
Primary locking in general See: Extracting the Cable Terminal From the Housing/Primary Locking In General Using terminal removal tools See:
Extracting the Cable Terminal From the Housing/Using Terminal Removal Tools When the cavity opening has two extraction grooves See:
Extracting the Cable Terminal From the Housing/When the Cavity Opening Has Two Extraction Grooves Cavity opening with one extraction
