volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 13916 > < Diagram Information and Instructions|Page 13914
Page 150
background image

-

Pull back the rubber cover on the cables

-

Remove rubber gasket (socket housings only).

-

Carefully release the clips by bending them out with a small screwdriver (one clip per side).

-

Depress the catch on the front of the housing and lift the housing out of the connector cover.

Open the housing 

Diagram Information and Instructions|Page 13916 > < Diagram Information and Instructions|Page 13914