C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Protective cap from bleed nipple on front LH brake caliper.
Connect drain bottle hose.
Open nipple approx. one turn.
-
Push brake caliper piston to bottom of caliper using a bolt clamp. Leave bolt clamp in the pushed-in position.
-
Pressurize braking system with bleeding unit. Drain off 2 - 3 dl (0.2 - 0.3 US qt) brake fluid.
-
Close bleed nipple and remove hose.
-
Re-fit protective cap.
-
Depressurize braking system using the bleeding unit.
-
Remove bolt clamp from brake caliper.
-
Depress brake pedal a few times.
Replace brake fluid RH, front. Then continue as per instructions below.
Removing brake pad LH rear
Remove Brake pad from brake caliper.
Replacing brake fluid LH rear
-
Remove protective cap from bleed nipple.
-
Connect drain bottle hose.
-
Open nipple approx. one turn.
-
Push brake caliper pistons to bottom of caliper. Use tool 999 2809 (x 2). Leave tools on calipers.
-
Pressurize braking system and bleeding unit.
-
Drain off 2 - 3 dl brake fluid
-
Close bleed nipple and remove hose.
-
Re-fit protective cap.
-
Depressurize braking system using bleeding unit.
-
Remove tools from brake calipers.
Installing rear brake pad
-
Install brake pad.
-
Depress brake pedal a few times.