C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Press the brake caliper piston at the bottom of the caliper using a G-clamp. Leave the G-clamp in pushed in position.
-
Pressurize the braking system with the bleed unit. Drain 2-3 dl of brake fluid.
-
Close the bleed nipple and remove the hose.
-
Install the protective cap.
-
Depressurize the braking system using the bleeding unit.
-
Remove the G-clamp from the brake caliper.
-
Depress the brake pedal several times.
*
Changing the brake fluid, right front
-
Repeat the procedure, according to points, on the right front brake caliper. Then continue with the following instructions.
Removing the brake pads, left rear
Remove:
-
the brake pads from the brake caliper.
Changing the brake fluid, left rear