C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Remove the protective cap from the bleed nipple.
-
Connect the collecting bottle hose.
-
Open the nipple approximately one turn.
-
Press in the caliper's pistons in the bottom of the caliper. Use tool 999 2809 PRESS TOOL See: Tools and Equipment/999 2809 Press Tool (2 x).
Leave the tools on the caliper.
-
Pressurize the braking system with the bleed unit.
-
Drain 2-3 dl of brake fluid.
-
Close the bleed nipple and remove the hose.
-
Install the protective cap.
-
Depressurize the braking system using the bleed unit.
-
Remove the tools from the brake caliper.
Installing the brake pads, rear
-
Install the brake pads.
-
Depress the brake pedal several times.
Changing the brake fluid, right rear
-
Repeat the procedure, according to points, on the right rear brake caliper.
Removing the bleed unit
Remove:
-
The bleed unit's connection from the brake fluid reservoir.
Finishing work
