C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Raise the car and remove the wheels.
-
Clean the filler cap for the brake fluid reservoir.
Use a collecting bottle with a hose to collect the brake fluid.
Changing brake fluid, front
-
Remove the protective cap from the bleed nipple.
-
Connect the collecting bottle hose. Open the nipple approximately one turn.
-
Press in the caliper's pistons at the bottom of the caliper using a G-clamp. See the illustration. Leave the G-clamp in the compressed position.
-
Depress the brake pedal to the limit position and keep there for approximately 2 seconds before releasing. Repeat this until 2-3 dl brake fluid has
been drained.
-
Close the bleed nipple when the brake pedal has been depressed to the limit position.
-
Remove the hose and install the protective cap.
-
Remove the G-clamp from the brake caliper.
-
Depress the brake pedal a few times.
Changing brake fluid, right front
-
Repeat the procedure, according to points, on the right front brake caliper.
Removing the brake pads, left rear
-
Remove the brake pads from the brake caliper, see Brake pads rear, replacement See: Brakes and Traction Control/Disc Brake System/Brake
Pad/Service and Repair/Removal and Replacement/Brake Pads Rear, Replacement.
Changing the brake fluid, left rear
