C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Remove the return hose on the control system cover.
Install a plastic plug in the connection on the cover.
Detach the return hose in the cooler. Align the hose upwards and reconnect it to the cooler.
Install a transparent plastic hose on the oil return hose connection.
Place a container beneath the hose to catch the oil.
Refilling
Apply the parking brake. Move the gear selector lever to position P.
Fill with approximately 2 liters of oil.
Start the engine. Allow the engine to idle.
Turn the engine off when air bubbles start to become visible in the hose.
Fill with approximately 2 liters of oil.
Start the engine again and let it idle.
Turn the engine off when air bubbles start to become visible in the hose.
Remove the hose from the oil cooler hose. Detach it from the connection to the cooler. Install the hose in the normal position on the cooler and the
transmission.
Further filling
Fill with approximately 2 liters of oil.
Apply the parking brake.
Start the engine. Allow the engine to idle. Move the gear selector through all the gear positions. Wait 4-5 seconds in each gear.
Checking the oil level
See Oil level, checking See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Procedures/Checking the Oil Level.
The capacity of the transmission is 7.6± 0.25 liters. (MAX, MIN).
