C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Filling the A/C system with oil
Note! Fill with oil before vacuum pumping.
Filling with PAG oil
When replacing pipes or hoses the oil can be filled through the service valve.
The procedure for topping up PAG oil (P/N 8708581-7) in the car is as follows:
-
Remove the needle valve in the service valve using valve tool 951 1204 REMOVAL TOOL See: Tools and Equipment/951 1204 Removal Tool.
Use the filling syringe (without plastic hose) supplied with the unit to top up the oil. Clean the syringe to avoid the possibility of mixing different types of
oil.
-
Check according to the table above. Measure how much oil is to be added. After topping up the oil, reinstall the needle valve.
Note! Use only your thumb and index finger when tightening the service valve using valve needle tool 951 1204 REMOVAL TOOL See: Tools
and Equipment/951 1204 Removal Tool. This is to prevent damage to the seal on the valve.
