C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Check that no pins or sockets are damaged on the connector
-
Gently press the control module down into the grooves inside the control module box. Press to the limit position.
-
Insert tool 999 5722 around the control module
-
Move the upper section of the tool forwards as far as it will go. Pull the tool up
-
Press the cover into place over the control modules
-
Check that the air ducts are correctly positioned.
Ordering software
Order software
Programming the control module
Program the new control module
After downloading the software or replacing the engine control module (ECM), the throttle unit must be adapted according to vehicle communication
input: "Adapting the throttle unit". Remedy as necessary.
Finishing
Check that no diagnostic trouble codes have been stored during the repair.
Test drive the car. Check that the function of the engine is OK.
