C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Check that the inner rubber seal is in position and that the drain pipe lies inside the inner seal.
-
Check the position of the ring (1).
-
Use Vaseline to lubricate the sealing surface of the rubber cap (2) where it meets the filler pipe.
-
Fit the rubber cap (ensure it is positioned correctly to the body).
-
Fit the ring (4) and drain pipe (3).
-
Attach the connectors to the fuel pump and level sensor. Tank pressure sensor and ABS sensors.
-
Fit the rubber bracket around the cable harness.
-
Fit the panels, covers and mats.