volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 3558 > < Procedures|Page 3556
Page 5
background image

-

the small hoses to the hose bracket on the cylinder block (left front)

-

the small hoses to the intake manifold as marked

-

the large hose to the intake manifold

-

the two plastic washers/spacers to the fan shroud

-

the four screws retaining the fan shroud at the upper edge

Connect the connector to the upper right corner of the fan shroud

-

the pipe to the control module cover

-

The evaporative emission system (EVAP) valve and its hose that runs downwards to the upper section of the fan shroud

Connect the evaporative emission system (EVAP) valve connector and the connectors on the fan shroud (closest to the battery and fan).

Procedures|Page 3558 > < Procedures|Page 3556