C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
the upper timing belt cover
-
the auxiliaries belt
-
the expansion tank
-
the servo reservoir. Check that the hoses are correctly positioned
-
the starter motor. Tighten the screws at the transmission to 40 Nm. Tighten the support bracket screw to 25 Nm
-
the charge air pipe between the throttle body (TB) and the charge air cooler (CAC).
Install:
-
the trigger wheel
-
the camshaft position (CMP) sensor housing and a new cover
-
the intake air hose between the turbocharger (TC) and the air cleaner (ACL) cover
-
the engine stabilizer brace. Tighten the screws at the suspension turrets and the screw for motor bracket
-
the cable to the battery negative terminal.
Checking The Engine
Test drive the car to check the function of the engine.
Replacing The Rear Seal
The Following Components Must Be Removed When Replacing The Rear Seal:
