volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Electronic Throttle Control Module|Service and Repair|Page 2463 > < Body Control Module|Service and Repair
Page 1
background image

Electronic Throttle Control Module: Service and Repair

Throttle Body (Electronic Throttle Module), Replacing 

Removal And Installation 

NOTE:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Removing the throttle body (TB) 

-

Remove
-

the battery negative lead.

-

the air intake between the front cover plate and the air cleaner (ACL) housing.

-

the charge air pipe between the throttle body (TB) and the charge air cooler (CAC).

-

Disconnect the throttle body (TB) connector.

-

Remove the 4 screws for the throttle body (TB).

-

Remove the throttle body (TB) and the gasket. Clean the mating surfaces thoroughly.

Electronic Throttle Control Module|Service and Repair|Page 2463 > < Body Control Module|Service and Repair