C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Insert tool 999 5722 (1) around the control module.
Move the upper section of the tool backwards as far as it will go (2). Raise the tool.
Carefully pull up the control module.
Install the control module
Gently press the control module down into the grooves inside the control module box. Press to the limit position!
Insert tool 999 5722 around the control module.
Move the upper section of the tool forwards to stop and pull it up.
Press the cover over the control modules.
Check that the air ducts are correctly positioned.
Ordering software
Order software.
Programming the control module
Program the new control module.
Finishing
Check that no diagnostic trouble codes have been stored during the repair.
