C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Transmission Position Switch/Sensor: Service and Repair
Checking and Adjusting the Gear-Shift Position Sensor
Checking and adjusting the gear-shift position sensor
Special tools: 999 5475
Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Removing engine compartment components
Ignition off.
Remove:
-
the air cleaner (ACL) housing and the intake manifold
-
the battery
-
the battery shelf.
Removing the transmission cable
Remove:
-
the screws from the bracket for the gear selector cable
-
the cable from the lever. Move the cable to one side.
Note: The tool must be positioned down to the Z edge, below the threads.
Checking the setting